Hoses and
Hose Assemblies
100R6
Mocal oil hoses and fittings are economically priced and suitable for all oil carrying purposes in vehicles except those used in competition where regulations specify a 135°C maximum temperature. (The hose will still function at these temperatures but a gradual but detectable hardening of the hose will shorten life).
| Hose Size |
Inner Diameter |
Outer Diameter |
Working Pressure |
Burst Pressure |
Min Bend Radius |
Hose Weight |
 |
 |
 |
 |
 |
 |
 |
| REF |
inch |
mm |
inch |
mm |
PSI |
MPa |
PSI |
MPa |
inch |
mm |
grams/m |
| 100R6-4 |
1/4 |
6.35 |
0.5 |
12.7 |
400 |
2.75 |
1600 |
11.0 |
2.48 |
63 |
130 |
| 100R6-5 |
5/16 |
7.94 |
0.56 |
14.3 |
400 |
2.75 |
1600 |
11.0 |
2.95 |
75 |
160 |
| 100R6-6 |
3/8 |
9.53 |
0.63 |
15.9 |
400 |
2.75 |
1600 |
11.0 |
2.95 |
75 |
180 |
| 100R6-8 |
1/2 |
12.70 |
0.77 |
19.8 |
400 |
2.75 |
1600 |
11.0 |
3.94 |
100 |
230 |
| 100R6-10 |
5/8 |
15.88 |
0.91 |
23.0 |
400 |
2.75 |
1600 |
11.0 |
4.92 |
125 |
325 |
| 100R6-12 |
3/4 |
19.05 |
1.03 |
27.0 |
400 |
2.75 |
1600 |
11.0 |
5.31 |
135 |
440 |
S100R6
Same as 100R6, but with a stainless steel braided cover.
| Hose Size |
Inner Diameter |
Outer Diameter |
Working Pressure |
Burst Pressure |
Min Bend Radius |
Hose Weight |
|
|
|
|
|
|
|
| REF |
inch |
mm |
inch |
mm |
PSI |
MPa |
PSI |
MPa |
inch |
mm |
grams/m |
| S100R6-4 |
1/4 |
6.35 |
0.51 |
13.0 |
400 |
2.75 |
1600 |
11.03 |
2.48 |
63 |
225 |
| S100R6-5 |
5/16 |
7.94 |
0.59 |
15.0 |
400 |
2.75 |
1600 |
11.03 |
2.95 |
75 |
260 |
| S100R6-6 |
3/8 |
9.53 |
0.67 |
17.0 |
400 |
2.75 |
1600 |
11.03 |
2.95 |
75 |
300 |
| S100R6-8 |
1/2 |
12.70 |
0.83 |
21.0 |
400 |
2.75 |
1600 |
11.03 |
3.94 |
100 |
365 |
| S100R6-10 |
5/8 |
15.88 |
0.95 |
24.0 |
400 |
2.75 |
1600 |
11.03 |
4.92 |
125 |
475 |
| S100R6-12 |
3/4 |
19.05 |
1.15 |
29.0 |
400 |
2.75 |
1600 |
11.03 |
5.31 |
135 |
625 |
BS Au108 Fuel Hose - SPH1
An inexpensive hose with single textile braid reinforcement and smooth black neoprene cover complies with British standard BS Au108/2-L4/C4/R for fuel hose.
| Hose Size |
Inner Diameter |
Outer Diameter |
Working Pressure |
Burst Pressure |
Min Bend Radius |
Hose Weight |
|
|
|
|
|
|
|
| REF |
inch |
mm |
inch |
mm |
PSI |
MPa |
PSI |
MPa |
inch |
mm |
grams/m |
| SPH1-4 |
1/4 |
6.35 |
0.5 |
12.7 |
150 |
1.03 |
725 |
5 |
0.79 |
20 |
130 |
| SPH1-5 |
5/16 |
7.94 |
0.58 |
14.7 |
150 |
1.03 |
725 |
5 |
1.77 |
45 |
160 |
| SPH1-6 |
3/8 |
9.53 |
0.66 |
16.7 |
150 |
1.03 |
725 |
5 |
1.57 |
40 |
200 |
BS Au108 Fuel Hose - SPH2
SPH1 with a stainless steel braided cover.
| Hose Size |
Inner Diameter |
Outer Diameter |
Working Pressure |
Burst Pressure |
Min Bend Radius |
Hose Weight |
|
|
|
|
|
|
|
| REF |
inch |
mm |
inch |
mm |
PSI |
MPa |
PSI |
MPa |
inch |
mm |
grams/m |
| SPH2-4 |
1/4 |
6.35 |
0.5 |
12.7 |
150 |
1.03 |
725 |
5 |
0.79 |
20 |
240 |
| SPH2-5 |
5/16 |
7.94 |
0.58 |
14.7 |
150 |
1.03 |
725 |
5 |
1.77 |
45 |
285 |
| SPH2-6 |
3/8 |
9.53 |
0.66 |
16.7 |
150 |
1.03 |
725 |
5 |
1.57 |
40 |
325 |
Stainless Steel Braided Fuel Hose - SPH3
Stainless steel braided nitrile rubber hose, less bulky than the BS Au108 compliant hose.
| Hose Size |
Inner Diameter |
Outer Diameter |
Working Pressure |
Burst Pressure |
Min Bend Radius |
Hose Weight |
|
|
|
|
|
|
|
| REF |
inch |
mm |
inch |
mm |
PSI |
MPa |
PSI |
MPa |
inch |
mm |
grams/m |
| SPH3-4 |
1/4 |
6.35 |
0.43 |
11.0 |
101 |
0.7 |
435 |
3 |
1.77 |
45 |
145 |
| SPH3-5 |
5/16 |
7.94 |
0.49 |
12.5 |
101 |
0.7 |
435 |
3 |
1.97 |
50 |
200 |
| SPH3-6 |
3/8 |
9.53 |
0.59 |
15.0 |
101 |
0.7 |
435 |
3 |
2.36 |
60 |
225 |
GRH
A high performance hose compatible with Mocal and Aeroquip reusable fittings.
| Hose Size |
Inner Diameter |
Outer Diameter |
Working Pressure |
Burst Pressure |
Min Bend Radius |
Hose Weight |
|
|
|
|
|
|
|
| REF |
inch |
mm |
inch |
mm |
PSI |
MPa |
PSI |
MPa |
inch |
mm |
grams/m |
| GRH-4 |
0.22 |
5.56 |
0.44 |
11.17 |
500 |
3.4 |
2000 |
13.8 |
2.0 |
50.8 |
105 |
| GRH-6 |
0.34 |
8.64 |
0.56 |
14.22 |
500 |
3.4 |
2000 |
13.8 |
2.5 |
63.5 |
235 |
| GRH-8 |
0.44 |
11.18 |
0.67 |
17.02 |
500 |
3.4 |
2000 |
13.8 |
3.5 |
88.9 |
260 |
| GRH-10 |
0.56 |
14.22 |
0.82 |
20.83 |
500 |
3.4 |
2000 |
13.8 |
4.0 |
101.6 |
325 |
| GRH-12 |
0.69 |
17.53 |
0.96 |
24.38 |
350 |
2.4 |
1400 |
9.7 |
4.5 |
114.3 |
405 |
| GRH-16 |
0.88 |
22.35 |
1.15 |
29.21 |
350 |
2.4 |
1400 |
9.7 |
5.5 |
139.7 |
610 |
G210
GRH with black braided nylon outer.
| Hose Size |
Inner Diameter |
Outer Diameter |
Working Pressure |
Burst Pressure |
Min Bend Radius |
Hose Weight |
|
|
|
|
|
|
|
| REF |
inch |
mm |
inch |
mm |
PSI |
MPa |
PSI |
MPa |
inch |
mm |
grams/m |
| G210-4 |
0.22 |
5.56 |
0.44 |
11.17 |
500 |
3.4 |
2000 |
13.8 |
2.0 |
50.8 |
105 |
| G210-6 |
0.34 |
8.64 |
0.56 |
14.22 |
500 |
3.4 |
2000 |
13.8 |
2.5 |
63.5 |
235 |
| G210-8 |
0.44 |
11.18 |
0.67 |
17.02 |
500 |
3.4 |
2000 |
13.8 |
3.5 |
88.9 |
260 |
| G210-10 |
0.56 |
14.22 |
0.82 |
20.83 |
500 |
3.4 |
2000 |
13.8 |
4.0 |
101.6 |
325 |
| G210-12 |
0.69 |
17.53 |
0.96 |
24.38 |
350 |
2.4 |
1400 |
9.7 |
4.5 |
114.3 |
405 |
| G210-16 |
0.88 |
22.35 |
1.15 |
29.21 |
350 |
2.4 |
1400 |
9.7 |
5.5 |
139.7 |
610 |
TFE
Brake hoses are made from TFE stainless steel wire braided hose with stainless steel fittings. Titanium fittings are also available, please enquire. Intended for use on competition vehicles to provide a hard feel and reduced travel to the brake pedal. This is achieved due to the lower volume of expansion under pressure achievable in this construction. They are also lighter than conventional hoses and more resistant to stone damage. They are not built to conform to existing standards laid down for brake hoses in normal use due to their inability to resist the continuous flexing that might occur in a vehicle with large wheel travel covering hundreds of thousands of miles between hose changes. Care must be taken in fitting to ensure that the hoses do not contact any moving part under conditions of extreme suspension travel and/or full steering lock.
| Hose Size |
Inner Diameter |
Outer Diameter |
Working Pressure |
Burst Pressure |
Min Bend Radius |
Hose Weight |
|
|
|
|
|
|
|
| REF |
inch |
mm |
inch |
mm |
PSI |
MPa |
PSI |
MPa |
inch |
mm |
grams/m |
| TFE3 |
0.13 |
3.30 |
0.25 |
6.35 |
3000 |
20.6 |
12000 |
82.7 |
1.50 |
38.1 |
65 |
| TFE4 |
0.19 |
4.83 |
0.30 |
7.62 |
3000 |
20.6 |
12000 |
82.7 |
2.00 |
50.8 |
90 |
| TFE5 |
0.27 |
6.86 |
0.37 |
9.44 |
2500 |
17.2 |
10000 |
68.9 |
3.00 |
76.2 |
95 |
| TFE6 |
0.32 |
8.13 |
0.42 |
10.67 |
2500 |
17.2 |
10000 |
68.9 |
4.00 |
101.6 |
130 |
| TFE8 |
0.42 |
10.67 |
0.54 |
13.72 |
2000 |
13.7 |
8000 |
55.1 |
5.25 |
133.4 |
175 |
Vacuum Hoses
Vacuum Servo Hose
Black nitrile outer and inner, reinforced textile hose for brake servos, 80% vacuum.
| Hose Size |
Inner Diameter |
Outer Diameter |
Working Pressure |
Burst Pressure |
Min Bend Radius |
Hose Weight |
|
|
|
|
|
|
|
| REF |
inch |
mm |
inch |
mm |
PSI |
MPa |
PSI |
MPa |
inch |
mm |
grams/m |
| VH-6 |
3/8 |
9.53 |
11.16 |
17.46 |
145 |
1 |
580 |
4 |
1.18 |
30 |
250 |
Silicone Vacuum Hose
Thick walled non reinforced silicone hose used in all applications except brakes.
| Hose Size |
Inner Diameter |
Outer Diameter |
Working Pressure |
Burst Pressure |
Min Bend Radius |
Hose Weight |
|
|
|
|
|
|
|
| REF |
inch |
mm |
inch |
mm |
PSI |
MPa |
PSI |
MPa |
inch |
mm |
grams/m |
| VH-M3 |
0.12 |
3 |
0.28 |
7 |
N/A |
N/A |
N/A |
N/A |
0.42 |
11 |
37.5 |
| VH-M4 |
0.16 |
4 |
0.31 |
8 |
N/A |
N/A |
N/A |
N/A |
0.47 |
12 |
47.7 |
| VH-M5 |
0.20 |
5 |
0.39 |
10 |
N/A |
N/A |
N/A |
N/A |
0.59 |
15 |
83.0 |
| VH-M6 |
0.24 |
6 |
0.43 |
11 |
N/A |
N/A |
N/A |
N/A |
0.65 |
17 |
87.8 |
| VH-M8 |
0.31 |
8 |
0.55 |
14 |
N/A |
N/A |
N/A |
N/A |
0.83 |
21 |
125.1 |
| VH-M10 |
0.39 |
10 |
0.63 |
16 |
N/A |
N/A |
N/A |
N/A |
0.95 |
24 |
138.2 |
Silicone Hose
Blue, red or black silicone rubber with smooth wipe down finish. Temperature range -50°C to 250°C. Comes as straight, 30° elbow, 45° elbow, 60° elbow, 90° elbow, 135° elbow or 180° elbow. Specials available to order include longer legs, reducing straights and elbows, wire reinforcing. Use for engine coolant hoses, turbo charger and supercharger hoses, heating and ventilating ducts where increased hose life and resistance to high under bonnet temperatures are required.
Fuel Filler Neck Hoses
Made from fuel resistant rubber, straight neck hoses are available in flexi with steel spring, non-reinforced or wrapped. Also available are 45° and 90° elbows.
Replacement original equipment hoses
Hoses made to the same length and configuration as original equipment.
